Skip to end of metadata
Go to start of metadata

EXCANET | Release Notes

 1.0.0(GP6)/20.12.2016

Netcad7 GP6 is compatible with Netcad 7.6 GP3.

  • It has been ensured that more than one sub-surface can be produced for each of the different excavation floor areas in the same project and that these sub-surfaces can be managed in separate layers.
  • It is now possible to assign automatic elevation to objects by referring to the directions of the routes.
  • Ability to get auxiliary lines used to create different surfaces from desired layer
  • Different helper lines can now be used for each surface.
  • Improvements have been made in the surface creation process.
 1.0.0(GP5)/09.02.2016

Netcad7 GP6 is compatible with Netcad 7.6 GP3.

  • It has been ensured that more than one sub-surface can be produced for each of the different excavation floor areas in the same project and that these sub-surfaces can be managed in separate layers.
  • It is now possible to assign automatic elevation to objects by referring to the directions of the routes.
  • Ability to get auxiliary lines used to create different surfaces from desired layer
  • Different helper lines can now be used for each surface.
  • Improvements have been made in the surface creation process.
 1.0.0(GP4)/04.05.2015

Compatible with NETCAD 7.0.0.377.

  • Nonlinear edges have been given the ability to create segments on the edges so that different excavation/fill designs can be made.

 

 1.0.0(GP3)/09.02.2015

Compatible with NETCAD 7.0.0.220.

  • The excavation plans provided the possibility of using slope types within the scope of BOHYY.
  • Improvements were made in the drawing process.
 1.0.0 (GP2)/04.09.2014

Compatible with Netcad 6.0.0.3405 (GP17).

  • Russian interfaces arranged
  • Various improvements and error corrections were made.
 1.0.0 (GP1)/12.08.2014

Compatible with Netcad 6.0.0.3280 (GP16).

  • Various improvements and error corrections were made.
 1.0.0/27.06.2014
  • Netcad 6.0.0.2924 (GP15) compatible first released.