Skip to end of metadata
Go to start of metadata

“NETPRO” is the Netcad module that creates the projects with all its steps. Projects such as highways, urban roads, urban transition, railways, airports, ports, dams, road pavements and road renewal, tunnels, underpasses design and excavation.

Automatic curve and superelevation application can be done with the standards of AASHTO and TCK

With the improved “Route Editor”, horizontal route designation according to AASHTO and TCK, automatic taking half Radius of a curve and automatic superelevation application can be made. AASHTO, vertical and horizontal harmony controlls can be bade.

 

Cross sections can be taken from the terrain model and alot of other data as well

Topographic plan point can be read from the data, points, lines, other vector object types and rasters with height as well as terrain model.

Automatic Vertical route can be designated based on the 3 dimensional cross section.

In addition to classical vertical route defining methotds, Automatic Vertical route can be designated based on the 3 dimensional cross section procedure can be done. Parabolical and vertical curves can be applied on these routes.

With the type section editor, all types of sections you need can be designed.

In addition to the basic designing tools such as the horizontal to vertical distance, slope, angle, the needed sections can be defined using the free point definitions. Road, canal, damn, tunnel and such sections can be defined with type editor definition tools or “Pick Object on Screen” application.

All sections produced by visual cross section viewer can be seen at the required parameter

With visual cross section watcher, the sections created from the model adn the sections defined by type section editor can be observed easily

Whole detail section procedures can be defined from a single editor with Section Editor.

Whole detail section procedures can be defined from a single editor with Section Editor.

With the section editor peeling excavation, head ditch, heel ditch and such detail section procedures are done automatically and reports on these sections can be taken.

Volume calculation can be done among two or more sections

With the volume calculation wizard, areas in between two sections or more can be calculated easily. Volume calculation of the areas more then one, with in one km can be made by transfering to different columns.

Automatic bruckner stabilization and drawing can be done and reports can be taken.

With the automatic bruckner stabilization procedure the whole land works planning can be done. According to the stabilization done, excavation and paid transportation footage scale, bruckner summary and such reports can be taken.

Footage can be taken quickly with the automatic footage

Ditches, walls, regulating, structures, fortifications, edge and expropriation Stones, the footage of the traffic signs and lists can be taken easily.

Cross section prints can be taken according to the standards of the highways

Cross section drawings can be done according to the highway standards. On these cross sections, volume splay stake level and distance to the axis values are placed automatically

Small art structures can be applied automatically and footage reports can be taken.

Box culvert, agricultural subways and such little art structures are placed on cross section automatically and reports on art structures are taken easily.

Plan, profile, sections and 3D visual can be seen at the same time. The changes done in plan and profile can be implemented rest of the files automatically.

With the synchronised visual attribute, Plan, profile, sections and 3D visual can be seen at the same time The changes done in plan and profile can be implemented rest of the files automatically.

Splay level plan drawing, profile drawing and cutting procedures can be done automatically.

Splay level plan drawing and profile drawing can be done according to the highway standards and a lot of the data can be changed by user. The plan and profile created can be cutted automatically.

Intersection design can be made with goal directed tools

Level moving procedures in the lanes of intersection, automatic profile drawing and intersection designs can be done.

TIN model of the finished road can be produced and  can be integrated to the existing model.

TIN model of the road which is done with project procedure can be produced. This model can put together wth the terrain and a model of the last situation can be produced.

Technical Videos

You can watch a technical videos here that showing NETPRO 7 processing steps such as creating a project file, determining the horizontal and vertical route, forming land cross-sections, entering transition and vertical deviation values, typical section design, detailed sections procedures such as stripping and excavation, cubic calculations, brükner compensation and creation of project plots.

Netcad Knowledge Sharing Platform

The knowledge sharing platform where Netcad technical experts give 7/24 technical support service, over 50,000  members  ask questions at any moment.  

If you are not a membernow is a great time to be a member.

Başarı Hikayeleri

  • No content found for label(s) başarı,netpro.